Skip to main content
Toggle navigation
Login
Search
Home
Industry Sessions
All Days
Tue, Mar 18
Wed, Mar 19
Thu, Mar 20
Industry Sessions
Type here to filter the list
Tuesday, March 18, 2025
8:30 AM – 11:55 AM
ET
IS01 - Powering the Post 48V Era: Addressing the Datacenter-Level Power Delivery Challenges in the AI Revolution
Industry Session Chair:
Zichao Ye (he/him/his)
– Google
Industry Session Chair:
Rolando Burgos
– Virginia Polytechnic Institute and State University
Student Session Assistant:
Mohamed Yasko
– KU Leuven
8:30 AM – 11:55 AM
ET
IS01 - Powering the Post 48V Era: Addressing the Datacenter-Level Power Delivery Challenges in the AI Revolution
Location: Level Four, A412
Industry Session Chair:
Zichao Ye (he/him/his)
– Google
Industry Session Chair:
Rolando Burgos
– Virginia Polytechnic Institute and State University
Student Session Assistant:
Mohamed Yasko
– KU Leuven
8:30 AM – 8:55 AM
ET
IS01.1 - ML Challenges to the 48V Architecture and the Next Generation Rack with +/-400Vdc bus
Location: Level Four, A412
Industry Session Presenter:
Xiong Li
– Google
Industry Session Presenter:
Christina Peabody
– Google
8:55 AM – 9:20 AM
ET
IS01.2 - Solid State Transformer (SST-Based) DC Architecture for Datacenter Applications
Location: Level Four, A412
Industry Session Presenter:
Rudy Wang, PhD
– Delta Electronics (Americas) Ltd
9:20 AM – 9:45 AM
ET
IS01.3 - Novel Quasi-Single-Stage Isolated 3-φ PFC Rectifier Concept Breaking Through the 99% Efficiency Barrier
Location: Level Four, A412
Industry Session Presenter:
Johann W. Kolar, PhD
– ETH Zurich
9:45 AM – 10:10 AM
ET
IS01.4 - MV SiC Power Electronics for Data Centers: Advantages, Challenges, and Control
Location: Level Four, A412
Industry Session Presenter:
Rolando Burgos
– Virginia Polytechnic Institute and State University
Co-Author:
Qiang Li
– Virginia Polytechnic Institute and State University
Co-Author:
Dong Dong
– Virginia Polytechnic Institute and State University
10:40 AM – 11:05 AM
ET
IS01.5 - Potential Benefits of DC Power Distribution Bus in Data Center Applications
Location: Level Four, A412
Industry Session Presenter:
Simon Loo (he/him/his)
– Siemens
Co-Author:
Ella Zhou
– Siemens
Co-Author:
Nathan Kalesnikoff (he/him/his)
– Siemens Mobility Inc.
11:05 AM – 11:30 AM
ET
IS01.6 - New Strategies in Design to Meet the Demands of AI Data Centers
Location: Level Four, A412
Industry Session Presenter:
Harry B. Handlin (he/him/his)
– ABB
11:30 AM – 11:55 AM
ET
IS01.7 - Integrated GaN Solution for Server Power Supply Units
Location: Level Four, A412
Industry Session Presenter:
Fei Yang (he/him/his)
– Texas Instruments
Co-Author:
Sheng-Yang Yu, PhD
– Texas Instruments, Inc.
8:30 AM – 11:55 AM
ET
IS02 - Global Electrification Continues to Grow, the Need for New Passives and Design Methods for Power Applications Has to Match
Industry Session Chair:
Alan J. Cooper, MSc., PhD., CEng MIET
– YAGEO
Industry Session Chair:
Frank Puhane, B.Eng (he/him/his)
– Würth Elektronik
Student Session Assistant:
Diego Montoya-Acevedo, MA (he/him/his)
– Universidad de Talca
PSMA Session
8:30 AM – 11:55 AM
ET
IS02 - Global Electrification Continues to Grow, the Need for New Passives and Design Methods for Power Applications Has to Match
Location: Level Four, A411
Industry Session Chair:
Alan J. Cooper, MSc., PhD., CEng MIET
– YAGEO
Industry Session Chair:
Frank Puhane, B.Eng (he/him/his)
– Würth Elektronik
Student Session Assistant:
Diego Montoya-Acevedo, MA (he/him/his)
– Universidad de Talca
PSMA Session
8:30 AM – 8:55 AM
ET
IS02.1 - Capacitors and Aircraft Power System Considerations for Higher Temperature Operation and Wide Bandgap Enablement
Location: Level Four, A411
Industry Session Presenter:
Roger A. Brewer
– Lockheed Martin
PSMA Session
8:55 AM – 9:20 AM
ET
IS02.2 - Considerations for Choosing Capacitors for High Power Applications
Location: Level Four, A411
Industry Session Presenter:
Frank Puhane, B.Eng (he/him/his)
– Würth Elektronik
PSMA Session
9:20 AM – 9:45 AM
ET
IS02.3 - Vapor Deposited Thin Film Thermoset Polymer Dielectrics for High-Performance, High-Reliability, Capacitors for In-Module Snubber Applications.
Location: Level Four, A411
Industry Session Presenter:
Steven Yializis (he/him/his)
– Polycharge
PSMA Session
9:45 AM – 10:10 AM
ET
IS02.4 - Utilizing Machine Learning Techniques for Reliability Analysis and Health Monitoring of DC-Link Capacitors
Location: Level Four, A411
Industry Session Presenter:
Mark Scott (he/him/his)
– Miami University
PSMA Session
10:40 AM – 11:05 AM
ET
IS02.5 - Improving the EMI Performance of Isolated Power Modules
Location: Level Four, A411
Industry Session Presenter:
Martin Haug, MD
– Würth Elektronik
PSMA Session
11:05 AM – 11:30 AM
ET
IS02.6 - The Significance of Managing Reactive Power in the Volatile, Uncertain, Complex, and Ambiguous (VUCA) Electric Energy Market
Location: Level Four, A411
Industry Session Presenter:
Nicola Gallazzi
– Ducati
PSMA Session
11:30 AM – 11:55 AM
ET
IS02.7 - Increasing the Confidence of Capacitor Life Calculations and the Tools Used
Location: Level Four, A411
Industry Session Presenter:
Alan J. Cooper, MSc., PhD., CEng MIET
– YAGEO
PSMA Session
8:30 AM – 11:55 AM
ET
IS03 - Innovations in Motor Drives
Industry Session Chair:
Reza Sharifi
– Texas Instruments
Industry Session Chair:
Yifei Zheng
– Infineon Technologies
Student Session Assistant:
Nasherul Islam (He)
– Zhejiang University
8:30 AM – 11:55 AM
ET
IS03 - Innovations in Motor Drives
Location: Level Four, A410
Industry Session Chair:
Reza Sharifi
– Texas Instruments
Industry Session Chair:
Yifei Zheng
– Infineon Technologies
Student Session Assistant:
Nasherul Islam (He)
– Zhejiang University
8:30 AM – 8:55 AM
ET
IS03.1 - Comparative Study of Surface Mount SiC MOSFETs in13kW Motor Drive for HVAC E-Compressor in EVs
Location: Level Four, A410
Industry Session Presenter:
Yuequan Hu, PhD
– Wolfspeed
Co-Author:
Zongzeng Hu
– Wolfspeed
Co-Author:
Fulin Zhang
– Wolfspeed
8:55 AM – 9:20 AM
ET
IS03.2 - Design and Optimization of SiC-Based 11kW Motor Drive with High Efficiency
Location: Level Four, A410
Industry Session Presenter:
Iris Liu
– wolfspeed
Co-Author:
Frank Wei
– wolfspeed
Co-Author:
Carter Chen (he/him/his)
– wolfspeed
Co-Author:
Anuj S. Narain, MSEE
– Wolfspeed
9:20 AM – 9:45 AM
ET
IS03.3 - Enhance Traction Motor Efficiency using a GaN based Four-Level Flying Capacitors Inverter
Location: Level Four, A410
Industry Session Presenter:
Marco Palma, MSCee MBA
– Efficient Power Conversion
Co-Author:
Fabio Mandrile (he/him/his)
– Politecnico di Torino
Co-Author:
Fausto Stella, PhD
– Politecnico di Torino
Co-Author:
enrico vico
– Politecnico di Torino
Co-Author:
salvatore musumeci
– Politecnico di Torino
Co-Author:
radu bojoi
– Politecnico di Torino
Co-Author:
vincenzo barba
– Politecnico di Torino
Co-Author:
Eric Armando
– Politecnico di Torino
9:45 AM – 10:10 AM
ET
IS03.4 - Highly integrated coin-sized 1 kW GaN-based motor drive
Location: Level Four, A410
Industry Session Presenter:
Edward A. Jones, PhD (he/him/his)
– Infineon Technologies Austria AG
Co-Author:
Maurizio Incurvati, PhD (he/him/his)
– Infineon Technologies Austria AG
10:40 AM – 11:05 AM
ET
IS03.5 - Meeting Standby Power Regulations in Motor Drive Applications
Location: Level Four, A410
Industry Session Presenter:
Mark Angelo Tarvina (he/him/his)
– Power Integrations
Co-Author:
John Emmanuel A. Tan
– Power Integrations
Co-Author:
Juan Paolo Quismundo, MSc
– Power Integrations
11:05 AM – 11:30 AM
ET
IS03.6 - Reduction of Motor Bearing Currents in Variable Frequency Drives Using CoolBLUE® and NaLA® Cores
Location: Level Four, A410
Industry Session Presenter:
Tobias Trupp (he/him/his)
– MAGNETEC GmbH
Co-Author:
Andreas Heim
– Magnetec Inc.
Co-Author:
Benjamin Keßler
– MAGNETEC GmbH
11:30 AM – 11:55 AM
ET
IS03.7 - Three-Phase Integrated GaN IPM Technology for Enhancing Power Efficiency and Density for Motor-Drive System
Location: Level Four, A410
Industry Session Presenter:
Toshio Yamanaka (he/him/his)
– Texas Instruments
Co-Author:
Manu Balakrishnan
– Texas Instruments
Co-Author:
Hely Zhang, MD
– Texas Instruments
8:30 AM – 11:55 AM
ET
IS04 - 3D-Power Packaging for AI and Vehicles
Industry Session Chair:
Jason Rouse, PhD, MBA
– Taiyo America
Industry Session Chair:
Brian C. Narveson (he/him/his)
– Narveson Consulting
Student Session Assistant:
Jenson Joseph C. Attukadavil (he/him/his)
– Indian Institute of Technology Bombay
PSMA Session
8:30 AM – 11:55 AM
ET
IS04 - 3D-Power Packaging for AI and Vehicles
Location: Level Four, A402
Industry Session Chair:
Jason Rouse, PhD, MBA
– Taiyo America
Industry Session Chair:
Brian C. Narveson (he/him/his)
– Narveson Consulting
Student Session Assistant:
Jenson Joseph C. Attukadavil (he/him/his)
– Indian Institute of Technology Bombay
PSMA Session
8:30 AM – 8:55 AM
ET
IS04.1 - Off-Road Vehicles' Power Electronics - Packaging and Thermal Management
Location: Level Four, A402
Industry Session Presenter:
Brij N. Singh, PhD (he/him/his)
– John Deere
PSMA Session
8:55 AM – 9:20 AM
ET
IS04.2 - Modern power conversion enabled by WGB semiconductors and innovative package solutions
Location: Level Four, A402
Industry Session Presenter:
Peter Friedrichs, PhD (he/him/his)
– Infineon Technologies AG
PSMA Session
9:20 AM – 9:45 AM
ET
IS04.3 - PowerSiP packaging for AI/datacenter applications
Location: Level Four, A402
Industry Session Presenter:
Vikas Gupta, PhD
– ASE, USA
PSMA Session
9:45 AM – 10:10 AM
ET
IS04.4 - Power Technology Report on Embedded and Integrated Magnetics
Location: Level Four, A402
Industry Session Presenter:
Ranajit Sai
– Tyndall National Institute
PSMA Session
10:40 AM – 11:05 AM
ET
IS04.5 - Advanced Package of Power Modules for AI
Location: Level Four, A402
Industry Session Presenter:
Ian Chan (he/him/his)
– Cyntec Co. Ltd., Taiwan
PSMA Session
11:05 AM – 11:30 AM
ET
IS04.6 - A packaging solution for powering AI processors
Location: Level Four, A402
Industry Session Presenter:
Joseph Meyer
– Ferric Inc., USA
PSMA Session
11:30 AM – 11:55 AM
ET
IS04.7 - Integrated GaN & Passive Modules by Panel Level Manufacturing for AI data centers
Location: Level Four, A402
Industry Session Presenter:
Yoshiaki Aizawa, ME (he/him/his)
– AOI Electronics, Japan
PSMA Session
8:30 AM – 11:55 AM
ET
IS05 - WBG Applications & Control
Industry Session Chair:
Sam Abdel-Rahman
– Infineon Technologies
Industry Session Chair:
Lei Han
– Infineon Technologies
8:30 AM – 11:55 AM
ET
IS05 - WBG Applications & Control
Location: Level Four, A403
Industry Session Chair:
Sam Abdel-Rahman
– Infineon Technologies
Industry Session Chair:
Lei Han
– Infineon Technologies
8:30 AM – 8:55 AM
ET
IS05.1 - A Cost Effective Hybrid FOC Solution for Power Tool Applications
Location: Level Four, A403
Industry Session Presenter:
George Liang, PhD (he/him/his)
– Infineon Technologies Americas Corp.
Co-Author:
Lei Han
– Infineon Technologies
8:55 AM – 9:20 AM
ET
IS05.2 - An Enhanced Pulse Width Modulation Control Technique Optimized for High Conversion Efficiency Across Input Line and Load
Location: Level Four, A403
Industry Session Presenter:
Hai Trung Huynh, Master of Science
– Power Integrations
Co-Author:
sundaresan Sundararaj
– Power Integrations
Co-Author:
Roland Saint-Pierre (he/him/his)
– Power Integrations
9:20 AM – 9:45 AM
ET
IS05.3 - How to easily convert a hard-switched full-bridge to a zero-voltage-switched full-bridge
Location: Level Four, A403
Industry Session Presenter:
John M. Dorosa
– Texas Instruments
Co-Author:
Daniel Hartung
– Texas Instruments
9:45 AM – 10:10 AM
ET
IS05.4 - Oscillation stability of parallel connected SiC MOSFETs
Location: Level Four, A403
Industry Session Presenter:
LIZHONG ZHOU (he/him/his)
– Toshiba America Electronic Components, Inc.
10:40 AM – 11:05 AM
ET
IS05.5 - Paralleling of 3x GaN FETs to 30 kW and Beyond
Location: Level Four, A403
Industry Session Presenter:
Yu Huang
– Renesas Electronics
Co-Author:
Davide Bisi, PhD (he/him/his)
– Renesas Electronics
Co-Author:
Godfrey Bolante
– Renesas Electronics
Co-Author:
Geetak Gupta
– Renesas Electronics
Co-Author:
Carl Neufeld
– Renesas Electronics
Co-Author:
Primit Parikh
– Renesas Electronics
Co-Author:
Likun Shen
– Renesas Electronics
Co-Author:
Nihal Singh
– Renesas Electronics
11:05 AM – 11:30 AM
ET
IS05.6 - SR FET Spike Reduction and Primary Switch ZVS During CCM Operation of a Flyback Converter
Location: Level Four, A403
Industry Session Presenter:
BALA SUDHAKAR SINGAMANENI
– Power Integrations Inc
11:30 AM – 11:55 AM
ET
IS05.7 - The Safest, Simplest and Most Efficient SiC : Analog Devices’ SiC Smart Switch
Location: Level Four, A403
Industry Session Presenter:
Rifat alam Siddique (he/him/his)
– Automotive Electrification at Analog Devices, Inc.
Co-Author:
John D. MORRIS
– Automotive Electrification at Analog Devices, Inc.
8:30 AM – 11:55 AM
ET
IS06 - Reliability Redefined: Optimizing the Design-to-Production Transition for Superior Product Performance
Industry Session Chair:
Crystal Yannarella
– L3Harris
Industry Session Chair:
Eric Swenson
– IBM
Student Session Assistant:
Youssof Fassi, MA
– CEA
PSMA Session
8:30 AM – 11:55 AM
ET
IS06 - Reliability Redefined: Optimizing the Design-to-Production Transition for Superior Product Performance
Location: Level Four, A404/A405
Industry Session Chair:
Crystal Yannarella
– L3Harris
Industry Session Chair:
Eric Swenson
– IBM
Student Session Assistant:
Youssof Fassi, MA
– CEA
PSMA Session
8:30 AM – 8:55 AM
ET
IS06.1 - Improving Power System Performance and Power Integrity using Time Domain Reflectometry (TDR)
Location: Level Four, A404/A405
Industry Session Presenter:
Sathish kumar Krishnananda (he/him/his)
– Tektronix
Co-Author:
Jonathan Tucker, BSEE, MBA
– Tektronix, Inc.
PSMA Session
8:55 AM – 9:20 AM
ET
IS06.2 - Smart Motors: Harnessing Sensor Data and AI for Predictive Maintenance
Location: Level Four, A404/A405
Industry Session Presenter:
Vivek Shivaram (he/him/his)
– Tektronix
Co-Author:
Niranjan R. Hegde, MTech (he/him/his)
– Tektronix India Pvt. Ltd.
Co-Author:
Shubha B
– N/A
Co-Author:
Srikrishna NH
– N/A
PSMA Session
9:20 AM – 9:45 AM
ET
IS06.3 - Ideas for Practical Use Case of Advanced Power Management Telemetry for System Reliability and Predictive Maintenance
Location: Level Four, A404/A405
Industry Session Presenter:
Bill Pelletier
– TDK
Co-Author:
Tony Ochoa (he/him/his)
– TDK
PSMA Session
9:45 AM – 10:10 AM
ET
IS06.4 - Joint GaN Technology Study
Location: Level Four, A404/A405
Industry Session Presenter:
Elona Lala, MS Electrical Engineer (she/her/hers)
– IBM
PSMA Session
10:40 AM – 11:05 AM
ET
IS06.5 - Verification of Additional Core Loss Due to Temperature, Voltage and Time at High Frequencies with Accelerated Voltage and Thermal Test
Location: Level Four, A404/A405
Industry Session Presenter:
Efrain Bernal Alzate (he/him/his)
– Wurth Elektronik
PSMA Session
11:05 AM – 11:30 AM
ET
IS06.6 - IPC 9592C Discussion
Location: Level Four, A404/A405
Industry Session Presenter:
Eric Swenson
– IBM
PSMA Session
Wednesday, March 19, 2025
8:30 AM – 11:55 AM
ET
IS07 - The Transformer in the Solid-State Transformer
Industry Session Chair:
George A. Slama
– Wurth Elektronik
Industry Session Chair:
Edward Herbert, BEEE (he/him/his)
– PSMA
Student Session Assistant:
Alyssa Brown (she/her/hers)
– University of Texas at Austin
PSMA Session
8:30 AM – 11:55 AM
ET
IS07 - The Transformer in the Solid-State Transformer
Location: Level Four, A412
Industry Session Chair:
George A. Slama
– Wurth Elektronik
Industry Session Chair:
Edward Herbert, BEEE (he/him/his)
– PSMA
Student Session Assistant:
Alyssa Brown (she/her/hers)
– University of Texas at Austin
PSMA Session
8:30 AM – 8:55 AM
ET
IS07.1 - Recommended Practices for Solid State Transformer Design and Testing
Location: Level Four, A412
Industry Session Presenter:
Paul Ohodnicki
– University of Pittsburgh
PSMA Session
8:55 AM – 9:20 AM
ET
IS07.2 - Addressing Insualtion and Isolation Issues in the Solid State Transformer
Location: Level Four, A412
Industry Session Presenter:
Zhicheng Guo
– Arizona State University
PSMA Session
9:20 AM – 9:45 AM
ET
IS07.3 - Impact of Standards on Design Choices and Material Options
Location: Level Four, A412
Industry Session Presenter:
Veda Samhitha Duppalli, PhD (she/her/hers)
– CorePower Magnetics
PSMA Session
9:45 AM – 10:10 AM
ET
IS07.4 - Thermal Design and Limits of the Transformer in the Solid State Transformer
Location: Level Four, A412
Industry Session Presenter:
Isaac Wong
– North Carolina State University
Industry Session Presenter:
Subhashish Bhattacharya, PhD
– North Carolina State University
PSMA Session
10:40 AM – 11:05 AM
ET
IS07.5 - Managing Trade-Offs in Design of High-Power Medium Frequency Transformers for Solid-State Transformers
Location: Level Four, A412
Industry Session Presenter:
Drazen Dujic
– Power Electronics Laboratory, EPFL
PSMA Session
11:05 AM – 11:30 AM
ET
IS07.6 - Medium Frequency Transformers for Data Centers
Location: Level Four, A412
Industry Session Presenter:
Isaac Wong
– North Carolina State University
PSMA Session
11:30 AM – 11:55 AM
ET
IS07.7 - Evolution of the Solid State Transformer for Different Applications
Location: Level Four, A412
Industry Session Presenter:
Rafal Wojda
– Oak Ridge National Laboratory
PSMA Session
8:30 AM – 11:55 AM
ET
IS08 - Gate driver, Protection & Safety Circuits
Industry Session Chair:
Emanuel Eni, PhD
– Infineon Technologies
Industry Session Chair:
Sasikala Thangam, B.E EEE
– TI
Student Session Assistant:
Hoang Le (he/him/his)
– Lakehead University
8:30 AM – 11:55 AM
ET
IS08 - Gate driver, Protection & Safety Circuits
Location: Level Four, A411
Industry Session Chair:
Emanuel Eni, PhD
– Infineon Technologies
Industry Session Chair:
Sasikala Thangam, B.E EEE
– TI
Student Session Assistant:
Hoang Le (he/him/his)
– Lakehead University
8:30 AM – 8:55 AM
ET
IS08.1 - A Novel Integrated Gate Driver Design for 650V GIT GaN HEMT
Location: Level Four, A411
Industry Session Presenter:
Zhemin Zhang
– Infineon
Co-Author:
Bainan Sun
– Infineon Technologies
Co-Author:
Filipe Esteves Tavora
– Infineon Technologies
Co-Author:
Diego Dias De Menezes
– Infineon Technologies
Co-Author:
Derek Bernardon
– Infineon Technologies
Co-Author:
Gernot Kasebacher
– Infineon Technologies
8:55 AM – 9:20 AM
ET
IS08.2 - Eliminate the cost for negative bias by integrated negative rail and bootstrap diode
Location: Level Four, A411
Industry Session Presenter:
Mengxuan Wei
– texas instruments
9:20 AM – 9:45 AM
ET
IS08.3 - Integrated advanced gate driver protection and safety features for high power systems
Location: Level Four, A411
Industry Session Presenter:
Luowei Wen, PhD
– Texas Instruments
Co-Author:
Daniel E. Norwood
– Texas Instruments
Co-Author:
Vivian Qi, M.Engg
– TI
Co-Author:
Sasikala Thangam, B.E EEE
– TI
9:45 AM – 10:10 AM
ET
IS08.4 - Is DESAT still a relevant short-circuit protection for today’s fast SiC MOSFETs?
Location: Level Four, A411
Industry Session Presenter:
Emanuel Eni, PhD
– Infineon Technologies
10:40 AM – 11:05 AM
ET
IS08.5 - Performance comparison of a pre-driver with external FETs vs an integrated high-current FET driver for high power applications
Location: Level Four, A411
Industry Session Presenter:
Sasikala Thangam, B.E EEE
– TI
Co-Author:
Thomas LaBella, Ph.D EE (he/him/his)
– TI
Co-Author:
Vivian Qi, M.Engg
– TI
11:05 AM – 11:30 AM
ET
IS08.6 - Pushing the switching performance limits of power semiconductors using dynamic drive
Location: Level Four, A411
Industry Session Presenter:
Daniel E. Norwood
– Texas Instruments
Co-Author:
Sergio J. Jimenez, PhD
– Wolfspeed
Co-Author:
Luowei Wen, PhD
– Texas Instruments
11:30 AM – 11:55 AM
ET
IS08.7 - Transformer-less Fast Negative Voltage Generator for SiC MOSFET Gate Drive
Location: Level Four, A411
Industry Session Presenter:
Jianlong Chen
– Wolfspeed
Co-Author:
Sumana Ghosh
– Wolfspeed
Co-Author:
Chen Wei
– Wolfspeed
Co-Author:
Jun Zhang
– Wolfspeed
8:30 AM – 11:55 AM
ET
IS09 - AC-DC & Flyback Applications
Industry Session Chair:
Elisabetta Mahmutovic
– Texas Instruments
Industry Session Chair:
Davide Giacomini (he/him/his)
– Infineon Technologies AG
Student Session Assistant:
Tobias S. Zekorn, MSc (he/him/his)
– Integrated Analog Circuits and RF Systems at RWTH Aachen University
8:30 AM – 11:55 AM
ET
IS09 - AC-DC & Flyback Applications
Location: Level Four, A410
Industry Session Chair:
Elisabetta Mahmutovic
– Texas Instruments
Industry Session Chair:
Davide Giacomini (he/him/his)
– Infineon Technologies AG
Student Session Assistant:
Tobias S. Zekorn, MSc (he/him/his)
– Integrated Analog Circuits and RF Systems at RWTH Aachen University
8:30 AM – 8:55 AM
ET
IS09.1 - 1.4 kW E-Scooter Battery Charger with Wide Range CV and CC Operation Modes
Location: Level Four, A410
Industry Session Presenter:
Miguel Carlos C. de la Pena (he/him/his)
– Power Integrations
8:55 AM – 9:20 AM
ET
IS09.2 - 3-Level Flying Capacitor Bridgeless PFC for High Power Density Server and Telecom Applications
Location: Level Four, A410
Industry Session Presenter:
David Meneses, PhD
– Infineon Technologies Nordic AB Filial
Co-Author:
Alex Rossi
– Infineon Technologies Austria AG
Co-Author:
Matteo-Alessandro Kutschak
– Infineon Technologies Austria AG
9:20 AM – 9:45 AM
ET
IS09.3 - 3-port USB-C charger and adapter meeting latest efficiency, standby and tiny-load requirements
Location: Level Four, A410
Industry Session Presenter:
Alfredo Medina Garcia
– Infineon Technologies AG
Co-Author:
Markus Schmid, PhD (he/him/his)
– Infineon Technologies AG
Co-Author:
Peter Bredemeier
– Infineon Technologies AG
Co-Author:
Shaon Mazumder
– Infineon Technologies India Prv. Ltd.
9:45 AM – 10:10 AM
ET
IS09.4 - A critical Analysis of Discrete and Power Module in Silicon Carbide Technology in On-Board Charger PFC Stage
Location: Level Four, A410
Industry Session Presenter:
Domenico Nardo, MD
– STMicroelectronics
Co-Author:
Giuseppe Aiello, PhD
– STMicroelectronics
Co-Author:
Francesco Gennaro, PhD
– STMicroelectronics
Co-Author:
Dario Patti
– STMicroelectronics
10:40 AM – 11:05 AM
ET
IS09.5 - High Efficiency 180W USB PD Adapter with SR-ZVS Flyback Converter
Location: Level Four, A410
Industry Session Presenter:
Remya Kuriakose
– Power Integrations
Co-Author:
Martin Benjamin L. Bonleon (he/him/his)
– Power Integrations
Co-Author:
Sudhakarababu Chakkirala, Ph. D
– Power Integrations
11:05 AM – 11:30 AM
ET
IS09.6 - Improving Light Load Efficiency of 5 V – 28 V Output USB-PD Notebook Adapters
Location: Level Four, A410
Industry Session Presenter:
Ralph Ryan I. Ipurong
– Power Integrations
Co-Author:
Ron Israel Nueda (he/him/his)
– Power Integrations
Co-Author:
Sudhakarababu Chakkirala, Ph. D
– Power Integrations
11:30 AM – 11:55 AM
ET
IS09.7 - Modeling and Verifying Loop Stability for a New Pulse Width Modulation Flyback Control Scheme
Location: Level Four, A410
Industry Session Presenter:
Adrian R. Umadhay (he/him/his)
– Power Integrations
Industry Session Presenter:
Sean Zantua
– Power Integrations
Co-Author:
Ishminder Dhanjal
– Power Integrations
8:30 AM – 11:55 AM
ET
IS10 - AI Tools for More Efficient Power Electronics Design
Industry Session Chair:
Kevin Hermanns
– PE-Systems GmbH
Industry Session Chair:
Stephanie Watts Butler, PhD, PE (she/her/hers)
– WattsButler LLC
Student Session Assistant:
Tung Tan Nguyen (he/him/his)
– National Taiwan University of Science and Technology
8:30 AM – 11:55 AM
ET
IS10 - AI Tools for More Efficient Power Electronics Design
Location: Level Four, A402
Industry Session Chair:
Kevin Hermanns
– PE-Systems GmbH
Industry Session Chair:
Stephanie Watts Butler, PhD, PE (she/her/hers)
– WattsButler LLC
Student Session Assistant:
Tung Tan Nguyen (he/him/his)
– National Taiwan University of Science and Technology
8:30 AM – 8:55 AM
ET
IS10.1 - Circuit AI for Bill Of Materials (BOM); Switching Loss Optimization; Capacitor RMS Current Estimation and MORE
Location: Level Four, A402
Industry Session Presenter:
Prasad Enjeti
– Texas A&M University
Co-Author:
Grant Pitel, PhD
– Magna-Power Electronics Inc.
8:55 AM – 9:20 AM
ET
IS10.2 - Using AI & High Performance Computing to design Power Electronics
Location: Level Four, A402
Industry Session Presenter:
Audrey Reznik, MS (she/her/hers)
– Red Hat
9:20 AM – 9:45 AM
ET
IS10.3 - Computational Intelligence Techniques for Improved Virtual Prototypes in Power Electronics
Location: Level Four, A402
Industry Session Presenter:
Peter Wilson, PhD MBA FIET FBCS FHEA SMIEEE (he/him/his)
– University of Bath
9:45 AM – 10:10 AM
ET
IS10.4 - MagNet Challenge for Data Driven Power Magnetics Modeling
Location: Level Four, A402
Industry Session Presenter:
Minjie Chen, PhD
– Princeton University
10:40 AM – 11:05 AM
ET
IS10.5 - Generating Lumped Element Equivalent Circuit Model Netlists for Passive Components Using a Small Language Model (SLM)
Location: Level Four, A402
Industry Session Presenter:
Richard Blakey, PhD MSc MBA
– Würth Elektronik
Co-Author:
Abdulrahman Altahhan
– University of Leeds
11:05 AM – 11:30 AM
ET
IS10.6 - AI for Converter Design: From Components and Control to Systems
Location: Level Four, A402
Industry Session Presenter:
Wilmar Martinez, PhD (he/him/his)
– KU Leuven - EnergyVille
Co-Author:
Qingcheng Sui
– KU Leuven - EnergyVille
11:30 AM – 11:55 AM
ET
IS10.7 - Cascading AI Techniques for the Approximation of Power Losses in Inductive Systems
Location: Level Four, A402
Industry Session Presenter:
Andreas Rosskopf
– Fraunhofer IISB
8:30 AM – 11:55 AM
ET
IS11 - WBG Converter Design
Industry Session Chair:
Darwin Fernandez
– Texas Instruments
Industry Session Chair:
Jason Zhang, MSEE (he/him/his)
– Navitas Semiconductor
Student Session Assistant:
Mowei Lu
– University of Cambridge
8:30 AM – 11:55 AM
ET
IS11 - WBG Converter Design
Location: Level Four, A403
Industry Session Chair:
Darwin Fernandez
– Texas Instruments
Industry Session Chair:
Jason Zhang, MSEE (he/him/his)
– Navitas Semiconductor
Student Session Assistant:
Mowei Lu
– University of Cambridge
8:30 AM – 8:55 AM
ET
IS11.1 - 500kHz Inverter Design Using Bidirectional GaN Switches
Location: Level Four, A403
Industry Session Presenter:
Jason Zhang, MSEE (he/him/his)
– Navitas Semiconductor
Co-Author:
Charles Bailey
– Navitas Semiconductor
8:55 AM – 9:20 AM
ET
IS11.2 - Mitigating EMI with SiC Solutions in Renewable Energy & Grid-Connected Power Converters
Location: Level Four, A403
Industry Session Presenter:
Sidharth Gupta (he/him/his)
– Wolfspeed
Co-Author:
Jianlong Chen
– Wolfspeed
Co-Author:
Chen Wei
– Wolfspeed
9:20 AM – 9:45 AM
ET
IS11.3 - Designing a Single-Stage Dual-Output Flyback Converter Using a High Voltage GaN Switch for Wide Input Voltage Range
Location: Level Four, A403
Industry Session Presenter:
Han Cui, MSC (she/her/hers)
– Power Integrations
Co-Author:
Yi Li
– Power Integrations
9:45 AM – 10:10 AM
ET
IS11.4 - Experimental analysis of gate voltage transients and their relation to Partial Turn-On in Silicon Carbide MOSFETs
Location: Level Four, A403
Industry Session Presenter:
Urvi Ahluwalia, MS (she/her/hers)
– Wolfspeed
Co-Author:
Adam Anders
– Wolfspeed
10:40 AM – 11:05 AM
ET
IS11.5 - Industry’s first stackable boost converter with integrated GaN FETs
Location: Level Four, A403
Industry Session Presenter:
Florian Schimkat, MSc (he/him/his)
– Texas Instruments
Co-Author:
Oliver Nachbaur
– Texas Instruments
Co-Author:
Puneet Sareen
– Texas Instruments
Co-Author:
Narayanan Seetharaman (he/him/his)
– Texas Instruments GmbH
Co-Author:
Stefan Herzer
– Texas Instruments
Co-Author:
Christian Rott
11:05 AM – 11:30 AM
ET
IS11.6 - Paralleling Smart discrete GaN HEMTs with current sense
Location: Level Four, A403
Industry Session Presenter:
Zhemin Zhang
– Infineon
Co-Author:
Yinglai Xia, PhD
– Infineon
Co-Author:
Abhishek Jain (he/him/his)
– Infineon Technologies
11:30 AM – 11:55 AM
ET
IS11.7 - Single Phase HERIC Inverter with SiC MOSFETs
Location: Level Four, A403
Industry Session Presenter:
Kasra Khazraei
– Infineon
Co-Author:
Isabel L. Alvarez
– Infineon
8:30 AM – 11:55 AM
ET
IS12 - New Era of Power Technologies, Devices, Topologies and Applications
Industry Session Chair:
Karthick Murukesan, PhD
– Power Integrations
Student Session Assistant:
Shibaji Basu
– Queens University
PSMA Session
8:30 AM – 11:55 AM
ET
IS12 - New Era of Power Technologies, Devices, Topologies and Applications
Location: Level Four, A404/A405
Industry Session Chair:
Karthick Murukesan, PhD
– Power Integrations
Student Session Assistant:
Shibaji Basu
– Queens University
PSMA Session
8:30 AM – 8:55 AM
ET
IS12.1 - GaN Bidirectional Switches: Present & Future
Location: Level Four, A404/A405
Industry Session Presenter:
Davide Bisi, PhD (he/him/his)
– Renesas Electronics
PSMA Session
8:55 AM – 9:20 AM
ET
IS12.2 - High performance 5 kW, 4-Level totem-pole PFC converter using 200 V GaN FETs for open compute servers
Location: Level Four, A404/A405
Industry Session Presenter:
Michael A. de Rooij, PhD (he/him/his)
– Efficient Power Conversion Corporation
PSMA Session
9:20 AM – 9:45 AM
ET
IS12.3 - Optimization of Si/SiC Hybrid Switches performance for High Power Inverters
Location: Level Four, A404/A405
Industry Session Presenter:
Harsha Ademane, MS (he/him/his)
– STMicroelectronics
Co-Author:
Gianni Vitale, MD
– STMicroelectronics
PSMA Session
9:45 AM – 10:10 AM
ET
IS12.4 - Innovating at the System Level in the Era of Highly Efficient Semiconductors
Location: Level Four, A404/A405
Industry Session Presenter:
Mrinal K. Das, PhD (he/him/his)
– onsemi
PSMA Session
10:40 AM – 11:05 AM
ET
IS12.5 - Superior Performance of Infineon's High Voltage CoolGaNTM Bidirectional AC Switch
Location: Level Four, A404/A405
Industry Session Presenter:
Jingcun Liu
– Infineon
PSMA Session
11:05 AM – 11:30 AM
ET
IS12.6 - Improving the Efficiency and Reducing Costs by PSMT mSiC(TM) MOSFETs
Location: Level Four, A404/A405
Industry Session Presenter:
Ehab Tarmoom
– Microchip Technology
Co-Author:
Zichen Zhang
– Microchip Technology Inc.
Co-Author:
Fernando Estrada
– Microchip Technology
Co-Author:
Ali Shahabi
– Microchip Technology
Co-Author:
Kevin Speer, PhD
– Microchip Technology
PSMA Session
11:30 AM – 11:55 AM
ET
IS12.7 - GaN D-mode vs. E-mode: A Clash of Technologies? Or the Perfect Co-existence?
Location: Level Four, A404/A405
Industry Session Presenter:
Jim Honea, PhD
– Nexperia
PSMA Session
1:30 PM – 4:55 PM
ET
IS13 - Powering AI Server Demands
Industry Session Chair:
Francesco Di Domenico
– Infineon Technologies
Industry Session Chair:
Harry Soin, MASc
– AEI
Student Session Assistant:
Mehrnaz Madadi (she/her/hers)
– North Carolina State University
1:30 PM – 4:55 PM
ET
IS13 - Powering AI Server Demands
Location: Level Four, A412
Industry Session Chair:
Francesco Di Domenico
– Infineon Technologies
Industry Session Chair:
Harry Soin, MASc
– AEI
Student Session Assistant:
Mehrnaz Madadi (she/her/hers)
– North Carolina State University
1:30 PM – 1:55 PM
ET
IS13.1 - Design of 5.5kW 3-phase LLC Converter with SiC MOSFETs for AI Server Applications
Location: Level Four, A412
Industry Session Presenter:
Yifei Zheng
– Infineon Technologies
Co-Author:
Yalcin Haksoz
– Infineon Technologies
Co-Author:
Deepak Veereddy (he/him/his)
– Infineon Technologies
1:55 PM – 2:20 PM
ET
IS13.2 - High Power Density 8kW Power Supply for Server and Data Center Applications
Location: Level Four, A412
Industry Session Presenter:
David Meneses, PhD
– Infineon Technologies Nordic AB Filial
Co-Author:
Manuel Escudero
– Infineon Technologies Austria AG
Co-Author:
Matteo-Alessandro Kutschak
– Infineon Technologies Austria AG
Co-Author:
Antonello Laneve
– Infineon Technologies Austria AG
Co-Author:
Alex Mirtchev
– Infineon Technologies Austria AG
Co-Author:
Theodoros Mouselinos
– Infieon Technologies Austria AG
2:20 PM – 2:45 PM
ET
IS13.3 - Power Supplies and Rack Architecture Evolution to Meet AI Servers Demands
Location: Level Four, A412
Industry Session Presenter:
Sam Abdel-Rahman
– Infineon Technologies
2:45 PM – 3:10 PM
ET
IS13.4 - Saras Embedded STile Advanced Technology Enabling High Performance Integrated Power Delivery Networks
Location: Level Four, A412
Industry Session Presenter:
Imran Khan, PhD (he/him/his)
– Saras Micro Devices
3:40 PM – 4:05 PM
ET
IS13.5 - Vertical Power Delivery Enables Higher Performance from xPU and AI Products
Location: Level Four, A412
Industry Session Presenter:
Tim Phillips, MBA
– Empower Semiconductor
Co-Author:
Trey A. Roessig (he/him/his)
– Empower Semiconductor
4:05 PM – 4:30 PM
ET
IS13.6 - Zero-Bias TLVR Exploration for Future Datacenter Computing Applications
Location: Level Four, A412
Industry Session Presenter:
Chi Hsu, MA (he/him/his)
– Google
4:30 PM – 4:55 PM
ET
IS13.7 - Zero-bias trans-inductor and metal-based Trans-inductor for High Performance Computing Infrastructures
Location: Level Four, A412
Industry Session Presenter:
Chi-shiuan Shie, MA (he/him/his)
– Cyntec
1:30 PM – 4:55 PM
ET
IS14 - Advancing Power Solutions: Integrating Wide Bandgap Technologies for Next-Generation Applications
Industry Session Chair:
Renee Yawger
– Efficient Power Conversion (EPC)
Industry Session Chair:
Llewellyn Vaughan-Edmunds
– Navitas Semiconductor
Student Session Assistant:
Shibaji Basu
– Queens University
PSMA Session
1:30 PM – 4:55 PM
ET
IS14 - Advancing Power Solutions: Integrating Wide Bandgap Technologies for Next-Generation Applications
Location: Level Four, A411
Industry Session Chair:
Renee Yawger
– Efficient Power Conversion (EPC)
Industry Session Chair:
Llewellyn Vaughan-Edmunds
– Navitas Semiconductor
Student Session Assistant:
Shibaji Basu
– Queens University
PSMA Session
1:30 PM – 1:55 PM
ET
IS14.1 - Leading the way with industry’s smallest integrated HV half-bridge and highly efficient pinout
Location: Level Four, A411
Industry Session Presenter:
Sandeep Bahl, PhD
– Texas Instruments
Co-Author:
. Nitish
– Texas Instruments
PSMA Session
1:55 PM – 2:20 PM
ET
IS14.2 - Enabling GaN Bidirectional AC Switches Through Self Biased Monolithically Integrated Substrate Management Circuit
Location: Level Four, A411
Industry Session Presenter:
Alexander Young
– Infineon
PSMA Session
2:20 PM – 2:45 PM
ET
IS14.3 - GaNSlim Power IC & DPAK-4L Package Enables 100W, 100cc, PD3.1 Continuous Power Solution with 95% Efficiency
Location: Level Four, A411
Industry Session Presenter:
Tom Ribarich
– Navitas Semiconductor
PSMA Session
2:45 PM – 3:10 PM
ET
IS14.4 - Powerstage GaN Integrated Circuits Operation in Robotic Applications
Location: Level Four, A411
Industry Session Presenter:
Marco Palma, MSCee MBA
– Efficient Power Conversion
PSMA Session
3:40 PM – 4:05 PM
ET
IS14.5 - The next decade for GaN
Location: Level Four, A411
Industry Session Presenter:
David Czajkowski, MSc, MBA (he/him/his)
– MinDCet NV
PSMA Session
4:05 PM – 4:30 PM
ET
IS14.6 - Pruning the Power Tree
Location: Level Four, A411
Industry Session Presenter:
David Chen (he/him/his)
– Power Integrations
PSMA Session
4:30 PM – 4:55 PM
ET
IS14.7 - Unlocking the Potential of Multi-level Inverters with Integrated ICeGaN technologies.
Location: Level Four, A411
Industry Session Presenter:
Daniel Murphy (he/him/his)
– Cambridge GaN Devices
PSMA Session
1:30 PM – 4:55 PM
ET
IS15 - DC-DC Conversion
Industry Session Chair:
Sudhakarababu Chakkirala, Ph. D
– Power Integrations
Industry Session Chair:
Richard Chung
– ST Microelectronics
Student Session Assistant:
Jenson Joseph C. Attukadavil (he/him/his)
– Indian Institute of Technology Bombay
1:30 PM – 4:55 PM
ET
IS15 - DC-DC Conversion
Location: Level Four, A410
Industry Session Chair:
Sudhakarababu Chakkirala, Ph. D
– Power Integrations
Industry Session Chair:
Richard Chung
– ST Microelectronics
Student Session Assistant:
Jenson Joseph C. Attukadavil (he/him/his)
– Indian Institute of Technology Bombay
1:30 PM – 1:55 PM
ET
IS15.1 - A Practical, Compact Resonant Transformer Solution for High Voltage Applications
Location: Level Four, A410
Industry Session Presenter:
Matthew Russell (he/him/his)
– Bourns Electronics
Co-Author:
Desmond J. O'Brien, Sr.
– Bourns Electronics
Co-Author:
Cathal Sheehan (he/him/his)
– Bourns Electronics
Co-Author:
Alireza Namadmalan
– Bourns Electronics
1:55 PM – 2:20 PM
ET
IS15.2 - Comparison of silicon MOSFET vs GaN for isolated half bridge LLC converters in visual display OLED TV applications
Location: Level Four, A410
Industry Session Presenter:
Ben Lough (he/him/his)
– Texas Instruments
2:20 PM – 2:45 PM
ET
IS15.3 - How to Achieve 30x Higher Power Density and Ultra-low EMI with Advanced Integration Technology of Isolated Converters
Location: Level Four, A410
Industry Session Presenter:
Pei-Hsin Liu, PhD
– Texas Instruments
Co-Author:
Mohamed Ahmed
– Texas Instruments
Co-Author:
Manuel Alva
– Texas Instruments
2:45 PM – 3:10 PM
ET
IS15.4 - Hybrid Control method to Extend gain range in Phase-shifted LLC Converter
Location: Level Four, A410
Industry Session Presenter:
Ramkumar Sivakumar (he/him/his)
– Texas Instruments
Co-Author:
Laszlo Balogh
– Texas Instruments
3:40 PM – 4:05 PM
ET
IS15.5 - Hybrid-Flyback: A novel power topology for ultra-flat SMPS designs
Location: Level Four, A410
Industry Session Presenter:
Alfredo Medina Garcia
– Infineon Technologies AG
Co-Author:
Josef Daimer
– Infineon Technologies AG
Co-Author:
TiamPoh Lau
– Infineon Technologies AG
Co-Author:
Cristina Martos-Contreras, MSc (she/her/hers)
– Infineon Technologies AG
Co-Author:
Markus Schmid, PhD (he/him/his)
– Infineon Technologies AG
Co-Author:
Manfred Schlenk
– Dr. Schlenk Consulting
4:05 PM – 4:30 PM
ET
IS15.6 - Maximize Efficiency in Isolated DC/DC Converters for Electric Vehicle Fast Charging Systems
Location: Level Four, A410
Industry Session Presenter:
Christopher D. New, PhD (he/him/his)
– Wolfspeed
4:30 PM – 4:55 PM
ET
IS15.7 - Split inductor self-balancing HV buck
Location: Level Four, A410
Industry Session Presenter:
Roberto Scibilia (he/him/his)
– TEXAS INSTRUMENTS
1:30 PM – 4:55 PM
ET
IS16 - Power Modules & Emerging Applications
Industry Session Chair:
Anuj S. Narain, MSEE
– Wolfspeed
Industry Session Chair:
Adam Anders
– Wolfspeed
Student Session Assistant:
Md Tariquzzaman
– Oregon State University
1:30 PM – 4:55 PM
ET
IS16 - Power Modules & Emerging Applications
Location: Level Four, A402
Industry Session Chair:
Anuj S. Narain, MSEE
– Wolfspeed
Industry Session Chair:
Adam Anders
– Wolfspeed
Student Session Assistant:
Md Tariquzzaman
– Oregon State University
1:30 PM – 1:55 PM
ET
IS16.1 - High-Reliability and Compact Integrated Actuation Power Solution for Light Weight Aerospace Applications up 15 kW
Location: Level Four, A402
Industry Session Presenter:
Amit Gole
– Microchip Technology
Co-Author:
Philippe Blanchard
– Microchip Technology
Co-Author:
Serge Bontemps (he/him/his)
– Microchip Technology
Co-Author:
Alain Calmels
– Microchip Technology
Co-Author:
Laurence Eagan
– Microchip Technology
Co-Author:
Vicent Walsh
– Microchip Technology
1:55 PM – 2:20 PM
ET
IS16.2 - Power Electronics- Reducing the Size and Increasing the Functionality of Medical Equipment.
Location: Level Four, A402
Industry Session Presenter:
Frank Cirolia, BSEE
– Advanced Energy
2:20 PM – 2:45 PM
ET
IS16.3 - Reliability analysis of newer generations of SiC baseless power module in bidirectional EV-Charging application
Location: Level Four, A402
Industry Session Presenter:
Andrea Bianchi, MA
– ABB
Co-Author:
Stefano Carboni, PhD (he/him/his)
– ABB
2:45 PM – 3:10 PM
ET
IS16.4 - SEMITRANS 20 with 2kV SiC MOSFETS for Next Generation High Power Converters
Location: Level Four, A402
Industry Session Presenter:
Kevork Haddad, MASc
– Semikron Danfoss
Co-Author:
Yue Zhao
– University of Arkansas
3:40 PM – 4:05 PM
ET
IS16.5 - Scalable multi-battery pack charging & back-up solutions
Location: Level Four, A402
Industry Session Presenter:
Christian Greeff (he/him/his)
– Texas Instruments
4:05 PM – 4:30 PM
ET
IS16.6 - Study of a Passive Approach for Improving Transient Current Sharing among Paralleled SiC MOSFETs
Location: Level Four, A402
Industry Session Presenter:
Yuequan Hu, PhD
– Wolfspeed
Co-Author:
Carter Chen (he/him/his)
– wolfspeed
Co-Author:
Chen Wei
– Wolfspeed
4:30 PM – 4:55 PM
ET
IS16.7 - The Role of Silicon Carbide in Enabling the Next Generation of Aerospace Transportation Applications
Location: Level Four, A402
Industry Session Presenter:
Dereje Woldegiorgis, PhD (he/him/his)
– Wolfspeed Inc
1:30 PM – 4:55 PM
ET
IS17 - Advanced Magnetics
Industry Session Chair:
George A. Slama
– Wurth Elektronik
Industry Session Chair:
Edward Herbert, BEEE (he/him/his)
– PSMA
Student Session Assistant:
Haoyu Wang
– The University of Texas at Austin
1:30 PM – 4:55 PM
ET
IS17 - Advanced Magnetics
Location: Level Four, A403
Industry Session Chair:
George A. Slama
– Wurth Elektronik
Industry Session Chair:
Edward Herbert, BEEE (he/him/his)
– PSMA
Student Session Assistant:
Haoyu Wang
– The University of Texas at Austin
1:30 PM – 1:55 PM
ET
IS17.1 - A new AC rated measurement method for wireless power transmission coils which will influence the design of wireless power systems
Location: Level Four, A403
Industry Session Presenter:
Cem Som (he/him/his)
– Wurth Elelctronics Midcom
Co-Author:
Christian Merz
– Wurth Electronics Midcom
Co-Author:
Deepthi Poonacha
– Wurth Electronics Midcom
1:55 PM – 2:20 PM
ET
IS17.2 - Fundamentals, Models and Performance of the Boosted Coupled Inductors
Location: Level Four, A403
Industry Session Presenter:
Alexandr Ikriannikov, PhD
– Analog Devices
2:20 PM – 2:45 PM
ET
IS17.3 - Innovative Approaches to High-Frequency Planar Transformers: Leveraging Nanocrystalline Materials for Enhanced Performance
Location: Level Four, A403
Industry Session Presenter:
Andre Buettner, Dipl. Ing.
– actain engineering GmbH
Co-Author:
Andreas Heim
– Magnetec Inc.
2:45 PM – 3:10 PM
ET
IS17.4 - Innovative Manufacturing Method for Inductors: Realizing Excellent Magnetic Properties and Reliability by Low-pressure Molding using Magnetic Molding Compound
Location: Level Four, A403
Industry Session Presenter:
Hiroki Sonokawa (he/him/his)
– Resonac Corporation
Co-Author:
Yoshinori Endo
– Resonac corporation
Co-Author:
Mika Tanaka
– Resonac corporation
3:40 PM – 4:05 PM
ET
IS17.5 - Magnetic Powder Materials with High Permeability for Inductor Applications
Location: Level Four, A403
Industry Session Presenter:
Yunfan Zhang (she/her/hers)
– Shenzhen POCO Magnetic Co., Ltd
4:05 PM – 4:30 PM
ET
IS17.6 - Removing Effects of Parallel Capacitances from Inductance and Resistance Measurements
Location: Level Four, A403
Industry Session Presenter:
Bryce L. Hesterman, MSEE (he/him/his)
– Utah State University
4:30 PM – 4:55 PM
ET
IS17.7 - Resolving Noise and Transformer Saturation from Magnetic Field Interactions in Integrated Electronics
Location: Level Four, A403
Industry Session Presenter:
Mason Hsu
– Google
Co-Author:
Charlie Liu (he/him/his)
– Chicony Power Technology
1:30 PM – 4:55 PM
ET
IS18 - Advanced Power Electronics & System Designs to Accelerate Transportation Electrification
Industry Session Chair:
Fernando Salcedo
– U.S. Department of Energy - VTO
Industry Session Chair:
Dinesh Kithany, MBA (Marketing) (he/him/his)
– Wired & Wireless Technologies (WAWT)
Student Session Assistant:
Shraf Eldin Sati
– Khalifa University of Science and Technology
PSMA Session
1:30 PM – 4:55 PM
ET
IS18 - Advanced Power Electronics & System Designs to Accelerate Transportation Electrification
Location: Level Four, A404/A405
Industry Session Chair:
Fernando Salcedo
– U.S. Department of Energy - VTO
Industry Session Chair:
Dinesh Kithany, MBA (Marketing) (he/him/his)
– Wired & Wireless Technologies (WAWT)
Student Session Assistant:
Shraf Eldin Sati
– Khalifa University of Science and Technology
PSMA Session
1:30 PM – 1:55 PM
ET
IS18.1 - Next-Drive – Power Electronics and Electric Motor Requirements for Extending Life of Electrified Medium & Heavy-Duty Vehicles (MHDVs)
Location: Level Four, A404/A405
Industry Session Presenter:
Burak Ozpineci, PhD
– Oak Ridge National Laboratory
PSMA Session
1:55 PM – 2:20 PM
ET
IS18.2 - Safety Critical designs considerations in High Power Wireless Charging
Location: Level Four, A404/A405
Industry Session Presenter:
John M. Wolgemuth, PE (he/him/his)
– InductEV
PSMA Session
2:20 PM – 2:45 PM
ET
IS18.3 - Modernizing Control Software Testing of Electric Powertrain Components
Location: Level Four, A404/A405
Industry Session Presenter:
Felipe Jung
– Typhoon HIL, Inc.
PSMA Session
2:45 PM – 3:10 PM
ET
IS18.4 - Advancements in Power Electronics to Enable Behind-the-Meter Storage Support of Extreme Fast Charging
Location: Level Four, A404/A405
Industry Session Presenter:
John Kisacikoglu
– National Renewable Energy Laboratory (NREL)
PSMA Session
3:40 PM – 4:05 PM
ET
IS18.5 - The Evolving Wireless EV Charging (WEVC) Technology Landscape
Location: Level Four, A404/A405
Industry Session Presenter:
Dinesh Kithany, MBA (Marketing) (he/him/his)
– Wired & Wireless Technologies (WAWT)
PSMA Session
4:05 PM – 4:30 PM
ET
IS18.6 - Medium Voltage Grid-tied Solid-State Transformers to Support High Power EV Charging
Location: Level Four, A404/A405
Industry Session Presenter:
Andy Schroedermeier, PhD
– EATON
PSMA Session
4:30 PM – 4:55 PM
ET
IS18.7 - Triple-Active Bridge Design to Enable Scalable High-Power Solid-State Transformers
Location: Level Four, A404/A405
Industry Session Presenter:
Matthew Honickman
– Mission Power Corp.
PSMA Session
Thursday, March 20, 2025
8:00 AM – 11:50 AM
ET
IS19 - Advancing Power Semiconductors Through AI & Digital Tools
Industry Session Chair:
Jaume Roig, PhD
– onsemi
Industry Session Chair:
Stephanie Watts Butler, PhD, PE (she/her/hers)
– WattsButler LLC
Student Session Assistant:
Abirami Kalathy (she/her/hers)
– Queen's University
PSMA Session
8:00 AM – 11:50 AM
ET
IS19 - Advancing Power Semiconductors Through AI & Digital Tools
Location: Level Four, A412
Industry Session Chair:
Jaume Roig, PhD
– onsemi
Industry Session Chair:
Stephanie Watts Butler, PhD, PE (she/her/hers)
– WattsButler LLC
Student Session Assistant:
Abirami Kalathy (she/her/hers)
– Queen's University
PSMA Session
8:00 AM – 8:25 AM
ET
IS19.1 - Machine readable Datasheets to Digital Twins
Location: Level Four, A412
Industry Session Presenter:
Kevin Hermanns
– PE-Systems GmbH
PSMA Session
8:25 AM – 8:50 AM
ET
IS19.2 - Copper Plane Generation based Artificial Microorganism
Location: Level Four, A412
Industry Session Presenter:
Subramanian Lalgudi, PhD
– Siemens
Co-Author:
Wilfried Wessel
– Siemens
PSMA Session
8:50 AM – 9:15 AM
ET
IS19.3 - Advancing Power Electronics Through AI & Digital Tools
Location: Level Four, A412
Industry Session Presenter:
Steven Lee
– Keysight Technologies
PSMA Session
9:15 AM – 9:40 AM
ET
IS19.4 - Distributed Learning of Power MOSFET Characteristics for Enhanced Manufacturing and Simulation
Location: Level Four, A412
Industry Session Presenter:
William C. Weeman, MSEE, EIT
– Keithley Instruments
Co-Author:
Keith R. Tinsley, MSEE, SM (he/him/his)
– Tektronix
PSMA Session
10:10 AM – 10:35 AM
ET
IS19.5 - Fab Technology Co-Optimization: Bringing Physics-based Digital Twin to Power Device Product Development
Location: Level Four, A412
Industry Session Presenter:
David Green
– Silvaco
Co-Author:
Garrett Schlenvogt
– Silvaco
PSMA Session
10:35 AM – 11:00 AM
ET
IS19.6 - Application of State-of-the-art Technology CAD (TCAD) To the Virtual Design of Si, SiC and GaN Power Transistors Optimized for Converters Targeting Charging, Motor Drives and Data Center Applications
Location: Level Four, A412
Industry Session Presenter:
Ricardo Borges, MSEE
– Synopsys
PSMA Session
11:00 AM – 11:25 AM
ET
IS19.7 - AI applied to Diagnostic and Monitoring of Power Modules for Traction inverter
Location: Level Four, A412
Industry Session Presenter:
Gianni Vitale, MD
– STMicroelectronics
Co-Author:
Michele Calabretta (he/him/his)
– STMicroelectronics
Co-Author:
Francesco Rundo
– ST
Co-Author:
Francesco Gennaro, PhD
– STMicroelectronics
PSMA Session
11:25 AM – 11:50 AM
ET
IS19.8 - Energy and Carbon Footprint of AI in Power Electronics - How sustainable are we?
Location: Level Four, A412
Industry Session Presenter:
Subham Sahoo
– Aalborg University
PSMA Session
8:00 AM – 9:40 AM
ET
IS20 - The Need for CyberSecurity in Power Supplies, Converters and Systems
Industry Session Chair:
Conor Quinn
– Advanced Energy Industries
Industry Session Chair:
Eric Swenson
– IBM
Student Session Assistant:
Mehrnaz Madadi (she/her/hers)
– North Carolina State University
8:00 AM – 9:40 AM
ET
IS20 - The Need for CyberSecurity in Power Supplies, Converters and Systems
Location: Level Four, A411
Industry Session Chair:
Conor Quinn
– Advanced Energy Industries
Industry Session Chair:
Eric Swenson
– IBM
Student Session Assistant:
Mehrnaz Madadi (she/her/hers)
– North Carolina State University
8:00 AM – 8:25 AM
ET
IS20.1 - The Evolution of Security in Digitally Controlled Power Supplies
Location: Level Four, A411
Industry Session Presenter:
Peter J. Miller, MS (he/him/his)
– Texas Instruments
8:25 AM – 8:50 AM
ET
IS20.2 - PMBus 1.5 Part IV: New Commands for Securing PMBus
Location: Level Four, A411
Industry Session Presenter:
Robert Santucci, PhD
– Intel Corporation
8:50 AM – 9:15 AM
ET
IS20.3 - Cyber Security Requirements in Open Compute Project’s M-CRPS Power Supply
Location: Level Four, A411
Industry Session Presenter:
Donato Kava
– Advanced Energy Industries
9:15 AM – 9:40 AM
ET
IS20.4 - Encryption Methodologies for Power Assemblies
Location: Level Four, A411
Industry Session Presenter:
Justin Henspeter, MSEE
– IBM
8:00 AM – 11:50 AM
ET
IS21 - Energy Management, Storage, and Electrification from Microwatts to Megawatts
Industry Session Chair:
Jeff Perkins, MBA
– Yole Inc.
Industry Session Chair:
David Chen (he/him/his)
– Power Integrations
Student Session Assistant:
Yijie Qian
– Southeast University
PSMA Session
8:00 AM – 11:50 AM
ET
IS21 - Energy Management, Storage, and Electrification from Microwatts to Megawatts
Location: Level Four, A410
Industry Session Chair:
Jeff Perkins, MBA
– Yole Inc.
Industry Session Chair:
David Chen (he/him/his)
– Power Integrations
Student Session Assistant:
Yijie Qian
– Southeast University
PSMA Session
8:00 AM – 8:25 AM
ET
IS21.1 - Do More Using Less with Optimized Power Factor Correction
Location: Level Four, A410
Industry Session Presenter:
Darrel Kingham
– Pulsiv
Co-Author:
Zaki Ahmed
– Pulsiv
Co-Author:
Nick Theodoris (he/him/his)
– Pulsiv
PSMA Session
8:25 AM – 8:50 AM
ET
IS21.2 - Grid-Forming Solutions with Energy Storage Integration
Location: Level Four, A410
Industry Session Presenter:
Jack Flicker
– Sandia National Laboratories
PSMA Session
8:50 AM – 9:15 AM
ET
IS21.3 - Challenges of an Inverterized Grid
Location: Level Four, A410
Industry Session Presenter:
Brendan Preece, MS, PE (he/him/his)
– Southern Company
Co-Author:
Jason Autrey, MA, PE
– Southern Company
PSMA Session
9:15 AM – 9:40 AM
ET
IS21.4 - EnerHarv - Driving an Ecosystem for Collaboration in Self-Powering IoT Edge Devices
Location: Level Four, A410
Industry Session Presenter:
Brian Zahnstecher, ME (he/him/his)
– PowerRox
PSMA Session
10:10 AM – 10:35 AM
ET
IS21.5 - RISEnergy - Synergies in and Access to Cross-Cutting Renewable Energy Technologies in Europe
Location: Level Four, A410
Industry Session Presenter:
Michael Hayes, MEngSc (he/him/his)
– Tyndall National Institute
PSMA Session
10:35 AM – 11:00 AM
ET
IS21.6 - Electrification and Its Impact on the Grid: Challenges and Opportunities
Location: Level Four, A410
Industry Session Presenter:
Baskar Vairamohan, MSEE, PE, CEM (he/him/his)
– EPRI
PSMA Session
11:00 AM – 11:25 AM
ET
IS21.7 - Electrification and IEEE TEC
Location: Level Four, A410
Industry Session Presenter:
Don Tan
– E2 Systems
PSMA Session
11:25 AM – 11:50 AM
ET
IS21.8 - Grid Interfaces for Transportation Electrification
Location: Level Four, A410
Industry Session Presenter:
Babu Chalamala, PhD (he/him/his)
– Sandia National Laboratories
PSMA Session
8:00 AM – 9:40 AM
ET
IS22 - Accurate Power-Related Measurement and Data Analysis Methodologies
Industry Session Chair:
Ben Dannan
– Signal Edge Solutions
Industry Session Chair:
Heidi Barnes
– Keysight Technologies
Student Session Assistant:
Tobias S. Zekorn, MSc (he/him/his)
– Integrated Analog Circuits and RF Systems at RWTH Aachen University
8:00 AM – 9:40 AM
ET
IS22 - Accurate Power-Related Measurement and Data Analysis Methodologies
Location: Level Four, A402
Industry Session Chair:
Ben Dannan
– Signal Edge Solutions
Industry Session Chair:
Heidi Barnes
– Keysight Technologies
Student Session Assistant:
Tobias S. Zekorn, MSc (he/him/his)
– Integrated Analog Circuits and RF Systems at RWTH Aachen University
8:00 AM – 8:25 AM
ET
IS22.1 - Ground Loops: How They Interfere with Low Impedance and Sensitive Measurements
Location: Level Four, A402
Industry Session Presenter:
STEVEN M. SANDLER
– www.picotest.com
8:25 AM – 8:50 AM
ET
IS22.2 - Predictive Digital-Twin Simulations that Shatter Old School Rules-of-Thumb
Location: Level Four, A402
Industry Session Presenter:
Heidi Barnes
– Keysight Technologies
8:50 AM – 9:15 AM
ET
IS22.3 - Precision Power Measurements for Voltage Regulator Characterization and POL Modeling
Location: Level Four, A402
Industry Session Presenter:
Ben Dannan
– Signal Edge Solutions
9:15 AM – 9:40 AM
ET
IS22.4 - 48V Power Bus, New Large and Small Signal Control Loop Assessments
Location: Level Four, A402
Industry Session Presenter:
Masashi Nogawa, MSEE (he/him/his)
– Qorvo
8:00 AM – 9:40 AM
ET
IS23 - EV Power Electronics
Industry Session Chair:
Sudhakarababu Chakkirala, Ph. D
– Power Integrations
Industry Session Chair:
Kamal Varadarajan, PhD
– Power Integrations
8:00 AM – 9:40 AM
ET
IS23 - EV Power Electronics
Location: Level Four, A403
Industry Session Chair:
Sudhakarababu Chakkirala, Ph. D
– Power Integrations
Industry Session Chair:
Kamal Varadarajan, PhD
– Power Integrations
8:00 AM – 8:25 AM
ET
IS23.1 - Addressing cost-performance challenges for EV powertrains with Si/SiC hybrid switch technology, a technical description
Location: Level Four, A403
Industry Session Presenter:
Sergio Elias, MS
– Infineon
8:25 AM – 8:50 AM
ET
IS23.2 - Applications of Electrochemical Impedance Spectroscopy on Lithium-Ion Battery Packs for Electric Vehicles
Location: Level Four, A403
Industry Session Presenter:
Sean Xu (he/him/his)
– Texas Instruments
Co-Author:
Pradeep Shenoy, PhD
– Texas Instrument
Co-Author:
David Magee
– Texas Instruments
8:50 AM – 9:15 AM
ET
IS23.3 - Exploiting benefits of power module in modern PFC stage for On-Board charger applications through the evaluation of thermal and electrical performance
Location: Level Four, A403
Industry Session Presenter:
Domenico Nardo, MD
– STMicroelectronics
Co-Author:
Ludovica Longo, ENG (she/her/hers)
– STMicroelectronics
9:15 AM – 9:40 AM
ET
IS23.4 - SuperBox – A Highly Integrated Power Electronics Solution for Dual-Motor Electric Vehicles
Location: Level Four, A403
Industry Session Presenter:
Yicheng Wang
– Schaeffler
Co-Author:
Wesam Taha, PhD
– Schaeffler
Co-Author:
Aniket Anand
– Schaeffler
8:00 AM – 9:40 AM
ET
IS24 - Core Loss - Making the Data Reliable and Relevant
Industry Session Chair:
Matt Wilkowski, MSEE
– Wurth Elektronik
Industry Session Chair:
Edward Herbert, BEEE (he/him/his)
– PSMA
PSMA Session
8:00 AM – 9:40 AM
ET
IS24 - Core Loss - Making the Data Reliable and Relevant
Location: Level Four, A404/A405
Industry Session Chair:
Matt Wilkowski, MSEE
– Wurth Elektronik
Industry Session Chair:
Edward Herbert, BEEE (he/him/his)
– PSMA
PSMA Session
8:00 AM – 8:25 AM
ET
IS24.1 - Core Evaluation Kit Initiative for the comparison of core loss measurement
Location: Level Four, A404/A405
Industry Session Presenter:
Jens Friebe (he/him/his)
– University of Kassel
Co-Author:
Wilmar Martinez, PhD (he/him/his)
– KU Leuven - EnergyVille
8:25 AM – 8:50 AM
ET
IS24.2 - HFEMAG European Metrology Labs Correlation Project
Location: Level Four, A404/A405
Industry Session Presenter:
Massimo Pasquale, Grad School in Atomic and Particle Physics (he/him/his)
– Istituto Nazional Di Ricerca Metrologica
8:50 AM – 9:15 AM
ET
IS24.3 - Triple Pulse Core Loss testing
Location: Level Four, A404/A405
Industry Session Presenter:
Jun Wang, PhD
– University of Bristol
9:15 AM – 9:40 AM
ET
IS24.4 - PSMA Core Loss Data Base
Location: Level Four, A404/A405
Industry Session Presenter:
George A. Slama
– Wurth Elektronik
10:10 AM – 11:50 AM
ET
IS25 - Marketing & Technology Trends in Power Electronics
Industry Session Chair:
Ada Cheng (she/her/hers)
– AdaClock
Industry Session Chair:
Stephen Oliver, MBA (he/him/his)
– Navitas Semiconductor
Student Session Assistant:
Mehrnaz Madadi (she/her/hers)
– North Carolina State University
10:10 AM – 11:50 AM
ET
IS25 - Marketing & Technology Trends in Power Electronics
Location: Level Four, A411
Industry Session Chair:
Ada Cheng (she/her/hers)
– AdaClock
Industry Session Chair:
Stephen Oliver, MBA (he/him/his)
– Navitas Semiconductor
Student Session Assistant:
Mehrnaz Madadi (she/her/hers)
– North Carolina State University
10:10 AM – 10:35 AM
ET
IS25.1 - How 1200V SiC Devices compete in performance ?
Location: Level Four, A411
Industry Session Presenter:
Amine Allouche, MSc, Eng (he/him/his)
– Yole Group
Co-Author:
Claire TROADEC
– Yole Group
10:35 AM – 11:00 AM
ET
IS25.2 - Securing Electric Vehicle Charging Stations: A Critical Analysis of Authentication Vulnerabilities and Their Role in Power Electronics Cybersecurity
Location: Level Four, A411
Industry Session Presenter:
Patrick Rempel, Prof. Dr.-Ing.
– Harz University of Applied Sciences
Co-Author:
Andre Buettner, Dipl. Ing.
– actain engineering GmbH
11:00 AM – 11:25 AM
ET
IS25.3 - SiC business reshaping will follow the surge in manufacturing capacity expansion
Location: Level Four, A411
Industry Session Presenter:
Milan Rosina (he/him/his)
– Yole Group
Co-Author:
Poshun CHIU
– Yole Intelligence
11:25 AM – 11:50 AM
ET
IS25.4 - What changing data centers architectures means for the future of power semiconductors
Location: Level Four, A411
Industry Session Presenter:
Callum J. Middleton, PhD (he/him/his)
– Omdia
10:10 AM – 11:50 AM
ET
IS26 - Test & Measurements
Industry Session Chair:
Edward A. Jones, PhD (he/him/his)
– Infineon Technologies Austria AG
Industry Session Chair:
Markondeyaraj Pulugurtha
– Florida International University
Student Session Assistant:
Tobias S. Zekorn, MSc (he/him/his)
– Integrated Analog Circuits and RF Systems at RWTH Aachen University
10:10 AM – 11:50 AM
ET
IS26 - Test & Measurements
Location: Level Four, A402
Industry Session Chair:
Edward A. Jones, PhD (he/him/his)
– Infineon Technologies Austria AG
Industry Session Chair:
Markondeyaraj Pulugurtha
– Florida International University
Student Session Assistant:
Tobias S. Zekorn, MSc (he/him/his)
– Integrated Analog Circuits and RF Systems at RWTH Aachen University
10:10 AM – 10:35 AM
ET
IS26.1 - 3rd generation power devices (WBG) measurement approach tips and guidelines
Location: Level Four, A402
Industry Session Presenter:
Marcus Sonst (he/him/his)
– Rohde & Schwarz GmbH & Co. KG
Co-Author:
Christian Schmidt
– Rohde & Schwarz GmbH & Co. KG
Co-Author:
Mike Schnecker
– Rohde & Schwarz GmbH & Co. KG
10:35 AM – 11:00 AM
ET
IS26.2 - A Comprehensive Anti-Islanding Test Model Utilizing Hardware-in-the-Loop Technology for Power Solutions
Location: Level Four, A402
Industry Session Presenter:
Brian Hsu
– Rexgear
Co-Author:
Ecson Hsu
– Rexgear
Co-Author:
Luis Veliz, BSEE
– Rexgear
11:00 AM – 11:25 AM
ET
IS26.3 - Comparing ZVS losses distribution of similar high performance GaN HEMTS
Location: Level Four, A402
Industry Session Presenter:
Théo SIMON (he/him/his)
– Wise integration
Co-Author:
Thanh Hai PHUNG
– Wise integration
Co-Author:
Johan DELAINE
– Wise integration
Co-Author:
Plinio C. F BAU, PhD
– Wise integration
Co-Author:
Alain BAILLY
– Wise integration
11:25 AM – 11:50 AM
ET
IS26.4 - Dynamic characterization of a WBG power semiconductor bare chip
Location: Level Four, A402
Industry Session Presenter:
Yu Watanabe, MA (he/him/his)
– Solution Engineering Organization / Keysight Technologies Japan
Co-Author:
Ryo Takeda, MSEE
– Keysight Technologies
Co-Author:
Takamasa Arai (he/him/his)
– Keysight Technologies
10:10 AM – 11:50 AM
ET
IS27 - Power Electronics in Extreme Environments
Industry Session Chair:
Jacob Mueller, PhD
– Sandia National Laboratories
Industry Session Chair:
Jason Neely
– Sandia National Laboratories
10:10 AM – 11:50 AM
ET
IS27 - Power Electronics in Extreme Environments
Location: Level Four, A403
Industry Session Chair:
Jacob Mueller, PhD
– Sandia National Laboratories
Industry Session Chair:
Jason Neely
– Sandia National Laboratories
10:10 AM – 10:35 AM
ET
IS27.1 - Realizing Radiation-Resilient Power Electronics using WBG/UWBG Devices
Location: Level Four, A403
Industry Session Presenter:
Jason Neely
– Sandia National Laboratories
10:35 AM – 11:00 AM
ET
IS27.2 - Watts on the Moon: The Electric Moon
Location: Level Four, A403
Industry Session Presenter:
Jin Wang, PhD
– The Ohio State University
11:00 AM – 11:25 AM
ET
IS27.3 - Enabling Geothermal and other HT Applications using UWBG Devices
Location: Level Four, A403
Industry Session Presenter:
Eric Leonardo Cruz (he/him/his)
– Sandia National Labs
11:25 AM – 11:50 AM
ET
IS27.4 - Power Electronic Systems for Subsea and Offshore Environments
Location: Level Four, A403
Industry Session Presenter:
Harish S. Krishnamoorthy, PhD (he/him/his)
– University of Houston
Co-Author:
John Allen
– University of Houston
10:10 AM – 11:50 AM
ET
IS28 - Solid State Solutions
Industry Session Chair:
Bridget O'Gorman
– PESC Inc
Industry Session Chair:
Doug Hopkins
– NC State University
10:10 AM – 11:50 AM
ET
IS28 - Solid State Solutions
Location: Level Four, A404/A405
Industry Session Chair:
Bridget O'Gorman
– PESC Inc
Industry Session Chair:
Doug Hopkins
– NC State University
10:10 AM – 10:35 AM
ET
IS28.1 - How B-TRAN™ technology is enabling transition to solid-sate EV Contactors
Location: Level Four, A404/A405
Industry Session Presenter:
Mudit Khanna
– Ideal Power
10:35 AM – 11:00 AM
ET
IS28.2 - Importance of clamping circuits for solid-state relays used with unclamped inductive loads
Location: Level Four, A404/A405
Industry Session Presenter:
Wolfgang FRANK, Dr.-Ing. (he/him/his)
– Infineon Technologies AG
11:00 AM – 11:25 AM
ET
IS28.3 - SiC JFET for Linear Mode Applications: Pre-Charge, Current Limiting and Active Discharge
Location: Level Four, A404/A405
Industry Session Presenter:
Shusun Qu, MSEE (he/him/his)
– onsemi
Co-Author:
Jonathan L. Dodge, BSEE, MSEE, P.E. (he/him/his)
– onsemi
11:25 AM – 11:50 AM
ET
IS28.4 - Toward a Practical Semiconductor Circuit Breaker with SiC JFETs
Location: Level Four, A404/A405
Industry Session Presenter:
Jonathan L. Dodge, BSEE, MSEE, P.E. (he/him/his)
– onsemi
Co-Author:
Shusun Qu, MSEE (he/him/his)
– onsemi
